Sover, Alexandru; Ermolai, Vasile (2024)
International Journal of Mechatronics and Applied Mechanics (15).
DOI: 10.17683/ijomam/issue15.1
Vendittoli, Valentina; Mascolo, Maria C.; Polini, Wilma; Sorrentino, Luca ; Sover, Alexandru; Walter, Michael S. J. (2024)
Vendittoli, Valentina; Mascolo, Maria C.; Polini, Wilma; Sorrentino, Luca ...
Journal of Materials Engineering and Performance 34, 16974–16984.
DOI: 10.1007/s11665-024-10407-8
Laser sintering, also known as powder bed fusion—laser beam, employs a laser to sinter-powdered polymeric materials, such as Polyamide 12. Despite the process, a significant portion of the powder remains unsintered. However, due to elevated temperatures, material degradation occurs, altering its chemical characteristics. Industrially, a common practice involves utilizing a mixture of virgin and aged powder, with the latter having undergone multiple thermal cycles without sintering. Developing an effective powder recycling methodology is fundamental for fully realizing the potential of Polyamide 12. This work focuses the attention on reused powder to manufacture parts in Polyamide 12 through selective laser sintering and evaluates the correlation between the properties of reused powder and the strength of manufactured part through six consecutive printing processes. To achieve this, a wide experimental approach was planned and developed to arrive to establish a clear relationship between the degree of crystallinity of the powder and the ultimate tensile strength of the part made from that powder. This relationship may be used to choose the kind of powder based on the strength required to the manufactured part in exercise. At the same time, if only a kind of powder is available, this relationship allows to predict the mechanical strength of the part manufactured.
Sover, Alexandru; Zink, Markus (2024)
28th Edition of International Conference (IMANEE 2024), Athen, October 2024.
Ermolai, Vasile; Merticaru, Vasile; Irimia, Alexandru Ionut; Mihalache, Andrei Marius; Sover, Alexandru; Mititelu, Nicolae-Răzvan ; Pista, Ionuț-Mădălin (2024)
Ermolai, Vasile; Merticaru, Vasile; Irimia, Alexandru Ionut; Mihalache, Andrei Marius...
Materials Research Proceedings, Athens, Greece 46, 23-24.
DOI: 10.21741/9781644903377-4
Sover, Alexandru; Boca, Marius-Andrei; Ermolai, Vasile; Mihalache, Andrei Marius; Irimia, Alexandru Ionuț; Hrițuc, Adelina; Slătineanu, Laurențiu; Nagîț, Gheorghe; Stavarache, Răzvan Cosmin (2024)
Sover, Alexandru; Boca, Marius-Andrei; Ermolai, Vasile; Mihalache, Andrei Marius...
Mechanics & Industry - Advanced Approaches in Manufacturing Engineering and Technologies Design 25, 24.
DOI: 10.1051/meca/2024017
Sover, Alexandru; Boca, Marius-Andrei (2024)
International Conference on Reliable Systems Engineering (ICoRSE), 2024.
Sover, Alexandru; Michalak, Martin (2024)
Plastverarbeiter 04.2024, 30-32.
Tekiner, Ismail Hakki; Knoblauch, Anke; Sover, Alexandru; Häfner, Philipp; Muschler, Nadja; Tainsa, Marwa (2024)
Tekiner, Ismail Hakki; Knoblauch, Anke; Sover, Alexandru; Häfner, Philipp...
Carpathian Journal of Food Science and Technology, 198-209.
DOI: 10.34302/crpjfst/2024.16.1.16
Martin, Annette; Sover, Alexandru (2024)
Fränkischer Tag.
Sover, Alexandru; Ermster, K.; Riess, A. K-M; Martin, Annette (2023)
Proceedings - 5th International Conference Business Meets Technology, Valencia, Spain, 67-76.
DOI: 10.4995/BMT2023.2023.16729
Ermolai, Vasile; Sover, Alexandru (2023)
5th International Conference Business Meets Technology, Valencia, Spain, 1.
DOI: 10.4995/BMT2023.2023.16731
Sover, Alexandru; Boca, Marius-Andrei; Slătineanu, Laurenţiu; Ermolai, Vasile (2023)
Acta Technica Napocensis - Series: Applied Mathematics, Mechanics, and Engineering, 66, 5.
LCD technology has been known for decades and used in the manufacture of components with photosensitive material (6K, 8K, polyurethane- based elastics resin, eco- and bioresins). The functional characteristics and aesthetics of components can be improved by adding reinforcing materials in the form of powders, pigments, or other additives. The paper presents the effects on the printing process with such a modified resin through a systematic approach. The modifications consisted in adding metallic powders with two different grain size (aluminum and copper). The results showed not only the possibility of successful printing but also problems that can occur during the processes. Several tests were carried out on a desktop LCD 3D printer, which makes the proposed approach applicable to any type of equipment.
Michalak, Martin; Sover, Alexandru (2023)
5th International Conference Business Meets Technology, Valencia, Spain, 51-58.
DOI: 10.4995/BMT2023.2023.16738
One of the common welding methods for polymer rooftop sheets is the overlap welding by hot air either done manually for small parts or with a welding machine for long sheets. The weld quality depends on different parameters like the welding speed, the welding temperature or the pressure applied on the joining materials. Due to the field of application of rooftop sheets, there are other environmental influences like the ambient temperature, the air humidity or direct sunshine which can cause a decrease of the welding quality. This work will focus on a pre welding influence, the storage temperature of the rooftop sheets and how it affects the welding quality. Two poly vinyl chloride (PVC) rooftop sheets were chosen and tested separately. The materials were cut into small sheets, stored under different temperature conditions, and were welded afterwards. The welded samples were tested according to the DIN EN 12317-2 to determine the shear resistance of the weld as it is an important mechanical property and a good indicator for the quality of the weld. The results show a minor influence on the welding process but no influence on the quality of the weld itself as all weld lines of all samples managed to stay intact
Boca, Marius-Andrei; Slătineanu, Laurenţiu; Sover, Alexandru (2023)
5th International Conference Business Meets Technology, Valencia, Spain.
DOI: 10.4995/BMT2023.2023.16748
Ermolai, Vasile; Sover, Alexandru; Nagit, Gheorghe; Boca, Marius-Andrei; Irimia, Alexandru Ionut (2023)
Ermolai, Vasile; Sover, Alexandru; Nagit, Gheorghe; Boca, Marius-Andrei...
Acta Technica Napocensis - Series: Applied Mathematics, Mechanics, and Engineering 66, 5.
Fused Filament Fabrication builds parts layer-wise by depositing molten thermoplastic in the shape of filaments. Those are characterized by thickness and width. Together with the deposition speed, they determine the material flow. Depending on the extrusion system melting capacity and the considered materials, the flow can be limited to a certain degree, leading to under-extrusion. Slicing tools such as Cura allows filaments to overlap to compensate for under-extrusion and prevent voids formation. However, if the superposition is too high, the melt is squeezed out of the deposition path, affecting the surface quality. This study aimed to evaluate the influence of raster width, angle, overlap, and deposition speed over the top surface topography of samples printed of ABS, ASA, and PC. The results show that the rasters’ width and overlap significantly influence top surface topography.
Ermolai, Vasile; Sover, Alexandru (2023)
International Conference on Reliable Systems Engineering (ICoRSE). Lecture Notes in Networks and Systems 762, 135-146.
DOI: 10.1007/978-3-031-40628-7_11
In recent years multi-material Additive Manufacturing gained more interest as new applications were found in domains such as bioengineering, soft robotics and actuators, electronics and many more. Fused Filament Fabrication (FFF) is one of the most used AM technologies for multi-material 3D printing due to relatively low-cost equipment and a large variety of thermoplastic materials. Even so, issues are still to be solved regarding the adhesion mechanisms at the level of bond interface, especially for dissimilar materials. Therefore, this paper aimed to identify influencing factors over the printing process of multi-material parts at the interface level. The influencing factors were determined using a literature review and Cura slicing tool user guide and systematised using a cause-effect diagram. The main domains of influence are Materials bonding, Printing equipment, Model geometry, and Method of printing and processing. These domains were further split into more specific factors and discussed based on their influence over multi-material interface printing.
Ermolai, Vasile; Sover, Alexandru (2023)
International Conference on Reliable Systems Engineering (ICoRSE) - 2023, Bucharest.
Friedrich, Bernhard; Tietze, Rainer; Dümig, Michaela; Sover, Alexandru; Boca, Marius-Andrei; Schreiber, Eveline; Band, Julia; Janko, Christina; Krappmann, Sven; Alexiou, Christoph; Lyer, Stefan (2023)
Friedrich, Bernhard; Tietze, Rainer; Dümig, Michaela; Sover, Alexandru...
International Journal of Nanomedicine 18, 3231-3246.
DOI: 10.2147/ijn.s409559
Purpose: Magnetic separation of microbes can be an effective tool for pathogen identification and diagnostic applications to reduce the time needed for sample preparation. After peptide functionalization of superparamagnetic iron oxide nanoparticles (SPIONs) with an appropriate interface, they can be used for the separation of sepsis-associated yeasts like Candida albicans. Due to their magnetic properties, the magnetic extraction of the particles in the presence of an external magnetic field ensures the accumulation of the targeted yeast.
Materials and methods: In this study, we used SPIONs coated with 3-aminopropyltriethoxysilane (APTES) and functionalized with a peptide originating from GP340 (SPION-APTES-Pep). For the first time, we investigate whether this system is suitable for the separation and enrichment of Candida albicans, we investigated its physicochemical properties and by thermogravimetric analysis we determined the amount of peptide on the SPIONs. Further, the toxicological profile was evaluated by recording cell cycle and DNA degradation. The separation efficiency was investigated using Candida albicans in different experimental settings, and regrowth experiments were carried out to show the use of SPION-APTES-Pep as a sample preparation method for the identification of fungal infections.
Conclusion: SPION-APTES-Pep can magnetically remove more than 80% of the microorganism and with a high selective host-pathogen distinction Candida albicans from water-based media and about 55% in blood after 8 minutes processing without compromising effects on the cell cycle of human blood cells. Moreover, the separated fungal cells could be regrown without any restrictions.
Sover, Alexandru (2023)
6th International Conference of the Doctoral School "Gheorghe Asachi" Technical University of Iași, May 17 - 19, Iași, România.
Sover, Alexandru (2023)
22. Treffen der regionalen Kunststoffbranche, GEKA GmbH, Weizendorf, 11. Mai 2023.
Fakultät Technik
Residenzstr. 8
91522 Ansbach
T 0981 4877-527 a.sover[at]hs-ansbach.de
ORCID iD: 0000-0003-3408-898X