Theoretical and experimental research on the quality of thermoformed foils using 3D-printed plastic moulds

Boca, Marius-Andrei; Sover, Alexandru; Slătineanu, Laurenţiu (2022)

IOP Conference Series: Materials Science and Engineering 1235, 012065.
DOI: 10.1088/1757-899x/1235/1/012065

Design and physical validation of a non-planar interlocking element for tubular structures

Ermolai, Vasile; Sover, Alexandru; Nagit, Gheorghe (2022)

IOP Conference Series: Materials Science and Engineering 1235, 012003.
DOI: 10.1088/1757-899X/1235/1/012003

Influence of contact geometry over the filament bond of polylactic acid blends

Ermolai, Vasile; Sover, Alexandru; Nagit, Gheorghe (2022)

IOP Conference Series: Materials Science and Engineering 1235, 012004.
DOI: 10.1088/1757-899x/1235/1/012004

Innovative process for material separation of printed circuit boards (PCB) with laser technology

Zink, Markus; Sover, Alexandru; Vogel, T (2022)

IOP Conference Series: Materials Science and Engineering 1235, 102009.
DOI: 10.1088/1757-899x/1235/1/012009

Experimental characterisation of physical properties of different PLA filaments used in FFF 3D printing technology

Lang, Anette; Sover, Alexandru (2022)

IOP Conference Series: Materials Science and Engineering 1235, 012002.
DOI: 10.1088/1757-899X/1235/1/012002

Improving Fracture Toughness of Tetrafunctional Epoxy with Functionalized 2D Molybdenum Disulfide Nanosheets

Sahu, Megha; Narasimhan, Lakshmi; Raichur, Ashok M.; Sover, Alexandru; Ciobanu, Romeo C.; Lucanu, Nicolae; Aradoaei, Mihaela (2021)

Sahu, Megha; Narasimhan, Lakshmi; Raichur, Ashok M.; Sover, Alexandru...

Polymers 13(24), 4440.
DOI: 10.3390/polym13244440

Analysis of damping spectra of silver-plated brass from a Weltklang saxophone manufactured in 1969

Weidenfeller, Bernd; Lambri, O.A.; Bonifacich, F.G.; Lambri, M.L.; Weidenfeller, L.; Sover, Alexandru (2021)

Weidenfeller, Bernd; Lambri, O.A.; Bonifacich, F.G.; Lambri, M.L.; Weidenfeller, L....

Journal of Alloys and Compounds 880, 160498.
DOI: 10.1016/j.jallcom.2021.160498

Investigation of the sample properties by position and numbers for DLP 3D printing method

Dinescu, Victor; Sover, Alexandru (2021)

Traditie şi inovare în cercetarea ştiinţifică 10 (1), 152-158.

Feasibility of Producing Core-Shell Filaments through Fused Filament Fabrication

Sover, Alexandru; Ermolai, Vasile; Ciobanu, Romeo C.; Aradoaei, Mihaela; Lucanu, Nicolae (2021)

Sover, Alexandru; Ermolai, Vasile; Ciobanu, Romeo C.; Aradoaei, Mihaela...

Polymers 13(23), 4253.
DOI: 10.3390/polym13234253

Development of moulds for thermoforming using FFF additive manufacturing and axiomatic design

Boca, Marius-Andrei; Slătineanu, Laurenţiu; Sover, Alexandru (2021)

IOP Conference Series: Materials Science and Engineering 1174, 012016.
DOI: 10.1088/1757-899X/1174/1/012016

Lackschichten umweltfreundlich entfernen

Sover, Alexandru; Zink, Markus (2021)

Journal für Oberflächentechnik 61, 50-53.
DOI: 10.1007/s35144-021-1188-4

The Printing Parameters Effects on the Dimensional Accuracy of the Parts Made of Photosensitive Resin

Boca, Marius-Andrei; Sover, Alexandru; Slătineanu, Laurenţiu (2021)

Macromolecular Symposia 396, 200287.
DOI: 10.1002/masy.202000287

Abrasive Erosion Behavior of Some Plastic Parts Obtained by 3D Printing

Hriţuc, Adelina; Slătineanu, Laurenţiu; Boca, Marius-Andrei; Sover, Alexandru; Nagit, Gheorghe; Dodun, Oana; Coteaţă, Margareta; Mihalache, Andrei Marius (2021)

Hriţuc, Adelina; Slătineanu, Laurenţiu; Boca, Marius-Andrei; Sover, Alexandru...

Macromolecular Symposia 396, 200288.
DOI: 10.1002/masy.202000288

Paint removal from thermoplastic materials and its influence on the physical-mechanical properties for the recycling of the polymer

Sover, Alexandru; Zink, Markus; Michalak, Martin (2021)

IOP Conference Series: Materials Science and Engineering 1037, 012032.
DOI: 10.1088/1757-899X/1037/1/012032

The dimensional accuracy of plastic parts made by the fused filament fabrication

Boca, Marius-Andrei; Sover, Alexandru; Slătineanu, Laurenţiu (2020)

IOP Conference Series: Materials Science and Engineering 997, 012021.
DOI: 10.1088/1757-899X/997/1/012021

Kunststoffformteil mit schwarzer- bzw. grauer UV-Markierung, Verfahren zur Herstellung einer Markierung des Kunststoffformteils sowie In-Mould-Folie (EP 3 225 376 B1)

Wirthwein, Marcus; Sover, Alexandru (2020)

Europäisches Patentamt.

3D-Printed Moulds for Thermoforming Process using the FFF Technology

Boca, Marius-Andrei; Sover, Alexandru (2020)

Business Meets Technology 2. Proceedings of the 2nd International Conference of the University of Applied Sciences Ansbach 3rd - 4th of July 2020. Düren: Shaker Verlag (campus_edition Hochschule Ansbach) 2, 44-47.

Study on the Process of Paint Removal from Thermoplastic Materials by Laser Technology

Zink, Markus; Sover, Alexandru (2020)

Business Meets Technology 2. Proceedings of the 2nd International Conference of the University of Applied Sciences Ansbach 3rd - 4th of July 2020. Düren: Shaker Verlag (campus_edition Hochschule Ansbach) 2, 40-43.

Research on the Process of Paint Removal from Thermoplastic Materials by Laser

Sover, Alexandru (2019)

IOP Conference Series: Materials Science and Engineering 564, 012028.
DOI: 10.1088/1757-899X/564/1/012028

Processing Conditions of Expandable Graphite in PP and PA Matrix and their Performance

Sover, Alexandru; Marzynkevitsch, Stanislav ; Munack, Bastian (2018)

Materiale Plastice 55, 507-510.
DOI: 10.37358/MP.18.4.5063